# Touchstone Exploration Inc tremendous potential of the Cascadura-1ST1 discovery confirmed

- Link: https://www.directorstalkinterviews.com/touchstone-exploration-inc-tremendous-potential-of-the-cascadura-1st1-discovery-confirmed/412832788
- Published: 2020-06-15T07:26:15+01:00
- Author: Giles Arbor

**[Touchstone Exploration](https://www.directorstalkinterviews.com/company/touchstone-exploration-inc/txp.l)
Inc.** (TSX, [LON:TXP](https://www.directorstalkinterviews.com/company/touchstone-exploration-inc/txp.l))
has announced final production test results from the Cascadura-1ST1 well on the 
Ortoire exploration block. The final test results for both the lower test (6,056
to 6,218 feet) and the upper test (5,570 to 5,915 feet) have been reviewed by the
Company’s independent reserves evaluator, GLJ Ltd., and the following information
is intended to complement initial production test results previously released by
on February 6, 2020 and March 11, 2020.

**Highlights**

**Upper test**

 * Flow and buildup test results suggest an Absolute Open Flow (“AOF”) natural gas
   rate of 390 million cubic feet per day (“MMcf/d”) at the sandface.

 * Final 24-hour extended flow test rate, limited by capacity of surface test equipment,
   averaged 5,472 barrels of oil equivalent per day (“boe/d”), 86% natural gas, 
   at a final sandface drawdown of 4%. Pressure data suggests that the well was 
   still cleaning up at the end of the extended test period.

 * Condensate Gas Ratio (“CGR”) was 28 barrels of 55° API condensate per million
   cubic feet of natural gas produced (“bbls/MMcf”) during the extended flow test.

**Lower test**

 * Flow and buildup test results suggest an AOF natural gas rate of 92 MMcf/d at
   the sandface.
 * Final 24-hour extended flow test rate, limited by the capacity of surface test
   equipment, averaged 5,157 boe/d, 87% natural gas, at a final sandface drawdown
   of 12%. Pressure data suggests that the well was still cleaning up at the end
   of the extended test period.
 * CGR was 26 bbls/MMcf of 55° API condensate during the extended flow test.

**Analysis**

 * Gas analysis indicated sweet, liquids rich natural gas with no hydrogen sulfide
   and no entrained water.

 * Based on the data obtained during both tests, the Cascadura-1ST1 reservoir appears
   to be unbounded within the area of investigation, confirming a larger pool than
   originally anticipated.

 * Absolute Open Flow Potential (“AOFP”) modelling indicates that it is reasonable
   to design for an initial gross production rate of between 7,750 and 9,700 boe/
   d (6,200 to 7,760 boe/d net) based on estimated gross rates of 40 to 50 MMcf/
   d of natural gas and 1,100 to 1,400 boe/d of condensate.

> **James Shipka, Touchstone Exploration Chief Operating Officer, commented:**
> “We are extremely pleased with the final testing data and GLJ’s independent analysis
> of the stage one and stage two information, as both confirm the tremendous potential
> of the Cascadura-1ST1 discovery. The low sandface drawdown, high reservoir pressure,
> and rapid recovery suggest a sizeable reservoir with excellent production potential.
> With minimal drawdown observed while flowing and with no boundaries seen in the
> analysis, the pressure data confirms that the Cascadura pool is larger than the
> area of investigation observed during the tests. On this basis, we will likely
> require additional drilling and production at Cascadura to fully understand and
> optimize production from the structure. We are now working with GLJ to complete
> an independent reserves evaluation for the Cascadura feature, which we expect 
> in July. The evaluation will use the test data along with wireline logs, analogous
> pool data, offset production and seismic to properly assign reserves to the pool.
> The team remains on course to begin drilling at our next prospect, Chinook, in
> July, where we are keen to explore a separate structure along the same geological
> trend. With several near-term catalysts for the Company, now is an exciting time
> for Touchstone, and we look forward to updating all our stakeholders in due course.”

As previously announced, the Cascadura-1ST1 exploration well onshore in the Republic
of Trinidad and Tobago (Touchstone 80% working interest operator, Heritage Petroleum
Company Limited 20% working interest) encountered substantial volumes of liquids
rich natural gas in two sand packages in the Herrera Gr7b formation with a total
combined thickness in excess of 777 feet. Evaluation of these sands was undertaken
in two stages with the first test evaluating 162 feet of pay in the lowermost section
of the wellbore and the second test evaluating 345 feet of pay in the uppermost 
section of the wellbore.

**Lower Stage One Testing**

During the 24-hour extended flow test of the lower interval (6,056 to 6,218 feet),
Cascadura-1ST1 averaged a production rate 26.8 MMcf/d of natural gas and an estimated
691 bbls/d of condensate (5,157 boe/d, 13% liquids). In this final extended flow
test, the well yielded 55° API condensate at a ratio of approximately 26 bbls/MMcf
of natural gas produced. Laboratory analysis of the produced gas indicated liquids
rich natural gas with no hydrogen sulfide content, no entrained water and no solids.

Following flow testing, the well was shut in for an extended pressure buildup survey
which concluded on February 27, 2020. During the buildup period, the Company observed
bottomhole pressures returning to pre-test levels of approximately 4,783 psi. Final
downhole flowing pressure at the end of the 24-hour flow test was 4,221 psi, indicating
a sandface drawdown of 12%. Flow and pressure buildup measurements were then reviewed
by GLJ as part of their pressure transient analysis report. This data suggests an
estimated sandface AOF rate of 92 MMcf/d. No physical boundaries were observed during
the pressure buildup test period, and no skin damage was visible at the sandface.
Pressure data suggests that the well was continuing to clean up during the extended
flow test.

**Upper Stage Two Testing**

Production testing of the upper interval (5,570 to 5,915 feet) resulted in an average
production rate of 28.1 MMcf/d of natural gas and an estimated 783 bbls/d of natural
gas liquids (approximately 5,472 boe/d, 14% liquids). During the final extended 
flow test, Cascadura-1ST1 yielded 55° API condensate at a ratio of approximately
28 bbls/MMcf of natural gas produced. Laboratory analysis of the produced gas indicated
liquids rich natural gas with no hydrogen sulfide content, no entrained water and
no solids.

Following flow testing, the well was shut in for an extended pressure buildup survey
which concluded on May 13, 2020. During this buildup period Touchstone observed 
bottomhole pressures returning to pre-test levels of approximately 4,728 psi. Final
downhole flowing pressure at the end of the 24-hour flow test was 4,550 psi, indicating
a final sandface drawdown of 4%. Flow and pressure buildup measurements were reviewed
by GLJ, indicating in an estimated sandface AOF rate of 390 MMcf/d. No physical 
boundaries were observed during the pressure buildup test period, and no skin damage
was visible at the sandface. Pressure data suggests that the well was continuing
to clean up during the extended flow test.

Analysis of the data supports an initial gross production rate of 40 to 50 MMcf/
d with an estimated 1,100 to 1,400 bbls/d of condensate (net production rate of 
approximately 6,200 to 7,760 boe/d). This initial estimated production rate is based
upon the AOFP modeling performed following analysis of the flow and buildup pressure
data. Touchstone will design the production and surface facilities to meet these
initial production capabilities. These rates reflect the well production from the
upper interval (test two), with the lower interval (test one) initially isolated,
as per the current well configuration.

Share on:
