# Switch Metals confirms lithium mineralisation at Kabore in maiden drilling results

- Link: https://www.directorstalkinterviews.com/switch-metals-confirms-lithium-mineralisation-at-kabore-in-maiden-drilling-results/4121268749
- Published: 2026-11-02T07:04:00+00:00
- Author: Amilia Stone

**Switch Metals plc** (LON:SWT), the critical metals company focused on tantalum
and lithium in Côte d’Ivoire, has announced initial assay results from its maiden
reverse circulation drilling programme at its Zraty and Kabore prospects. Both prospects
lie within the Badinikro permit on the Company’s Issia Project, in the Birimian 
terranes of south-western Côte d’Ivoire.

These are the first holes drilled by the Company in the Issia pegmatite district.
Initial results confirm lithium mineralisation at depth beneath the Kabore surface
discovery, alongside tantalum and niobium mineralisation at both Kabore and Zraty.
Mineralisation has been identified in multiple pegmatite bodies, supporting the 
potential for a broader critical metals system at Issia.

Assays have been received for the first seven of the 34 holes drilled. Results for
the remaining 27 holes, 26 for Kabore and one for Zraty, are still to come.

**Highlights**

_Programme_

 * Assays received for the first 7 RC holes of 34 holes (3,438m): 4 of 30 at Kabore
   and three of four at Zraty
 * Tantalum-niobium mineralisation identified at both Kabore and Zraty, complementing
   the Company’s existing near-surface tantalum and niobium (coltan) exploration
   activities at Issia

_Kabore: lithium_

 * 14m at 1.02% Li₂O from 42m, including 7m at 1.75% Li₂O from 43m (ISBRC0024), 
   with a best single metre of 2.63% Li₂O
 * 13m at 0.26% Li₂O from 29m, including 1m at 1.42% Li₂O from 32m (ISBRC0009), 
   approximately 200m north-east of ISBRC0024, confirming lithium mineralisation
   on a second drill section
 * Lithium mineralisation confirmed at depth beneath the spodumene discovery, where
   surface grades reach 2.8% Li₂O
 * Significant lithium exploration upside: scout drilling has tested only 500m of
   more than a 1.3km prospective strike, on fences 50m to 100m apart

_Kabore: coltan_

 * 6m at 130 ppm Ta₂O₅ and 152 ppm Nb₂O₅ from 29m (ISBRC0009), and 2m at 158 ppm
   Ta₂O₅ and 180 ppm Nb₂O₅ from 34m (ISBRC0023), with coltan (tantalum and niobium)
   present in all four holes assayed
 * The association of tantalum and niobium with lithium is consistent with geochemically
   fertile Lithium-Caesium-Tantalum (LCT) pegmatite systems

_Zraty: tantalum_

 * 6m at 85 ppm Ta₂O₅ and 134 ppm Nb₂O₅ from 58m (ISBRC0003), the first holes to
   be drilled at Zraty, with pegmatite intersected in all three holes assayed and
   tantalum-niobium mineralisation in two of the three holes
 * Drill grades are well below surface samples (up to 1,230 ppm Ta₂O₅); further 
   work is needed to test for higher-grade shoots

_Looking ahead_

 * 27 holes still to report: 26 at Kabore and 1 at Zraty. Further updates will be
   provided as results become available
 * Follow-up drilling: full interpretation of the Kabore dataset under way to design
   the next holes along strike and at depth
 * Growing the footprint: geochemical and mapping programme launched to extend Kabore
   beyond the current 1.3km prospective strike, with soil sampling and scout auger
   drilling continuing across Issia to generate further targets

> **Karl Akueson, CEO of Switch Metals commented:**
> _“Although these results have taken a little longer to come through than anticipated,
> they have been worth the wait. The Issia pegmatite district had never been drill-
> tested and our first holes at Kabore confirm lithium at depth beneath the spodumene
> we discovered at surface. We believe Kabore is now a drill-confirmed lithium discovery._
> _“Maiden drilling at Kabore has confirmed mineralisation beneath the surface discovery
> and supports the interpretation of Issia as a pegmatite system containing both
> lithium and coltan (tantalum and niobium)._
> _“The initial drilling results support the potential for lithium mineralisation
> beneath the lithium-rich spodumene discovery at Kabore, where reported surface
> grades reach 2.8% Li___(2)__O. Drilling returned a best single metre of 2.63% 
> Li___(2)__O and a downhole interval of 14m at 1.02% Li___(2)__O, including 7m 
> averaging 1.75% Li___(2)__O. Further drilling and the outstanding assays will 
> help us assess continuity along strike and at depth._
> _“In addition, the mineralisation is enriched by intervals of tantalum and niobium
> helping to explain the widespread surface occurrences observed across the drilling
> area. At Zraty, our first holes have intersected the pegmatite with tantalum and
> niobium mineralisation, and further work will test for higher-grade shoots._
> _“Only four of the thirty Kabore holes have been assayed so far. The pegmatite
> system is open at depth and along strike and work is ongoing to further extend
> this target. The remaining results will shape the next phase of drilling._
> _“Lithium activity is also building in the region. Operators backed by Chinese
> lithium majors are active around our Tiassalé project, where we have identified
> seven lithium targets, and with Kabore now drill-confirmed, we have lithium opportunities
> at both Issia and Tiassalé._
> _“We have a busy period ahead: the remaining 27 drill holes to report, laboratory
> assay results from our shallow tantalum programme, and further work to advance
> our Tantalum Mineral Resource Estimate. We look forward to updating shareholders
> as these work programmes progress.”_

**Figure 1: Issia Project. Kabore and Zraty location map with Spodumene and LCT 
pegmatite, RC drilling area, MRE area.**⌊0373726d 81b8 4973 91f6 0490cc0e5276 (SWT)⌉

**Drilling Programme**

**_Kabore_**

The completed maiden RC drilling programme comprised 34 holes totalling 3,438m at
the Kabore and Zraty prospects within the Issia Project, investigating pegmatite-
hosted lithium, tantalum and niobium mineralisation. The programme was initially
planned at approximately 2,500m, with the final allocation between prospects subject
to drilling results and geological observations (see announcement dated 17 June 
2026).

At Kabore, 30 RC holes totalling 3,186m were completed across seven drill fences
spaced approximately 50m to 100m apart, testing approximately 500m of strike out
of 1.3km.

Drilling at Kabore targeted the down-dip extension of the spodumene-bearing pegmatite
discovered at surface in early 2026 with lithium grades of up to 2.8% Li₂O in the
discovery trench, and the 1.3 km rubidium soil anomaly that surrounds it (see announcements
dated 2 February 2026 and 4 June 2026).

Drilling results show that Kabore is underlain by interbedded mica schist and sandstone.
The sequence is moderately to strongly deformed. It is intruded by numerous NE-striking
pegmatite dykes. Some dykes are continuous and linear. Others are anastomosing and
follow lithological contacts. Alteration comprises sericite, chlorite, silica and
hematite, with quartz veining and garnet.

 * ISBRC0024 returned 14m at 1.02% Li_(2)O from 42m, including 7m at 1.75% Li_(2)
   O from 43m. The best single metre assayed 2.63% Li_(2)O. A tantalum and niobium
   enriched zone of 5m at 97 ppm Ta_(2)O_(5) and 145 ppm Nb_(2)O_(5) from 37m lies
   immediately above the lithium interval.
 * ISBRC0009, which lies 200m north-east of ISBRC0024, returned 13m at 0.26% Li_(
   2)O from 29m including 1m at 1.42% Li_(2)O from 32m. The upper part of the interval
   is enriched in tantalum and niobium with 6m at 130 ppm Ta_(2)O_(5) and 152 ppm
   Nb_(2)O_(5) from 29m.
 * ISBRC0023 and ISBRC0006 intersected pegmatite with no significant lithium. They
   returned 2m at 158 ppm Ta_(2)O_(5) and 180 ppm Nb_(2)O_(5) from 34m and 2m at
   143 ppm Ta_(2)O_(5) and 187 ppm Nb_(2)O_(5) from 68m, respectively.

These intercepts confirm that lithium, tantalum and niobium mineralisation continues
below the surface discovery. The system remains open at depth and to the south-west.
Most Kabore results are still pending.

Assay results include the following significant intersections:

**Table 1: Significant intersections:**

| **Hole ID** | **Prospect** | **From (m)** | **To (m)** | **Interval (m)** | **Li₂O (%)** | **Ta₂O₅ (ppm)** | **Nb₂O₅ (ppm)** | 
| **ISBRC0024** | **Kabore** | **42** | **56** | **14** | **1.02** | **42** | **78** | 
| _incl._ |   | _43_ | _50_ | _7_ | _1.75_ | _58_ | _110_ | 
| ISBRC0024 ^((3)) | Kabore | 37 | 42 | 5 | 0.11 | 97 | 145 | 
| ISBRC0009 | Kabore | 1 | 2 | 1 | 0.02 | 153 | 169 | 
| **ISBRC0009** | **Kabore** | **29** | **42** | **13** | **0.26** | **66** | **78** | 
| _incl._ |   | _32_ | _33_ | _1_ | _1.42_ | _106_ | _132_ | 
| _Incl._ |   | _29_ | _35_ | _6_ | _0.29_ | _130_ | _152_ | 
| ISBRC0023 | Kabore | 34 | 36 | 2 | 0.05 | 158 | 180 | 
| ISBRC0006 | Kabore | 68 | 70 | 2 | 0.04 | 143 | 187 | 
| ISBRC0003 ^((3)) | Zraty | 58 | 64 | 6 |   | 85 | 134 | 
| _incl._ | _ _ | _61_ | _62_ | _1_ | _ _ | _112_ | _172_ | 
| ISBRC0001 ^((3)) | Zraty | 40 | 42 | 2 |   | 64 | 87 | 
| ISBRC0002 | Zraty |   |   |   | NSI |   |   |

Notes: (1) All intervals are reported as downhole lengths. Kabore holes were drilled
at about -50° to -60° towards 290° or 110°, approximately perpendicular to the strike
of the NNE-trending pegmatites as mapped at surface. Interpretation on drill sections
indicates steeply dipping pegmatites. Estimated true widths are approximately 50%
to 70% of downhole lengths. (2) Significant intersections are reported using a lower
cut-off of 0.25% Li₂O and/or 100 ppm Ta₂O₅, with a maximum of 4 m of consecutive
internal dilution, with flexibility allowing a fair representation of mineralised
intervals. Intervals meeting either criterion are reported. No top cut has been 
applied. Grades are length-weighted averages. No metal equivalents are reported.(
3) ISBRC0001, ISBRC0003, ISBRC0024 have been reported below cut-off grade to disclose
low-grade mineralisation in Ta₂O₅ and Nb₂O₅. (4) Samples analysed by Intertek, Perth
area, Western Australia by sodium peroxide fusion with ICP finish. Lithium assays
are reported as Li₂O using a conversion factor of 2.153 (Li × 2.153). Tantalum assays
are reported as Ta₂O₅ using a conversion factor of 1.2211 (Ta × 1.2211). Niobium
is reported as Nb₂O₅ (Nb × 1.431); values below detection limit are taken as zero.(
5) Certified reference materials, blanks and duplicates were inserted at a rate 
of one additional QC sample for every 9 RC samples. NSI = No Significant Intersection.

**Figure 2: Kabore geological map with RC collars, drill sections and significant
intercepts. ISBRC0024 lies on Section 1. ISBRC0009 lies about 200m to the north-
east.**

![8f321286 3526 48e4 bd0a 8ff3b7a04e60 (SWT)](https://dw6uz0omxro53.cloudfront.net/
3862992/8f321286-3526-48e4-bd0a-8ff3b7a04e60.jpeg "Switch Metals confirms lithium
mineralisation at Kabore in maiden drilling results (SWT)")

**Figure 3: Kabore Section 1 (looking North-North-East) showing ISBRC0024, ISBRC0023
and the interpreted steeply dipping pegmatite dykes. Assays shown as downhole Li,
Ta and Nb strips.**

![26cdeb0c f05f 4f7c a35d c3e8fec9ffd1 (SWT)](https://dw6uz0omxro53.cloudfront.net/
3862992/26cdeb0c-f05f-4f7c-a35d-c3e8fec9ffd1.png "Switch Metals confirms lithium
mineralisation at Kabore in maiden drilling results (SWT)")

**_Zraty_**

At Zraty, 4 RC holes totalling 252m were completed to investigate tantalum and niobium-
bearing pegmatites previously identified through surface exploration.

Initial assay results have identified tantalum and niobium mineralisation at Zraty.

Four RC holes tested the Zraty tantalum pegmatite on two sections. They are the 
first holes drilled on this prospect. Assays have been received for three holes.
All three intersected a steeply dipping pegmatite in mica schist. The alteration
assemblage matches Kabore.

 * ISBRC0003: 6m at 85 ppm Ta_(2)O_(5) and 134 ppm Nb_(2)O_(5) from 58m including
   1m at 112 ppm Ta_(2)O_(5) and 172 ppm Nb_(2)O_(5) from 61m.
 * ISBRC0001: 2m at 64 ppm Ta_(2)O_(5) and 87 ppm Nb_(2)O_(5) from 40m.
 * ISBRC0002: no significant intercept.

Whilst drill grades are well below the surface samples (up to 1,230 ppm Ta_(2)O_(
5)), the results confirm that the pegmatite continues down dip to the south. Tantalum
in pegmatites is often concentrated in discrete shoots. Further work is needed to
test for higher-grade zones.

**Exploration Potential and Next Steps**

The initial scout programme was designed to establish the geometry and mineralisation
of the pegmatite system.

The results will be incorporated into the Company’s geological interpretation to
refine potential follow-up drilling targets along strike and at depth. Assays for
27 holes remain outstanding and, subject to laboratory turnaround times, are expected
by the end of 2026.

Soil sampling, scout auger drilling and geological mapping are ongoing at Issia 
to investigate north and south strike extensions and identify further drilling targets.

Share on:
