# Surface Transforms plc continues its journey from a dev company to a mainstream volume automotive supplier

- Link: https://www.directorstalkinterviews.com/surface-transforms-plc-continues-its-journey-from-a-dev-company-to-a-mainstream-volume-automotive-supplier/412768000
- Published: 2019-02-26T07:08:49+00:00
- Author: Giles Arbor

**[Surface Transforms](https://www.directorstalkinterviews.com/company/surface-transforms-plc/sce.l)
plc** ([LON: SCE](https://www.directorstalkinterviews.com/company/surface-transforms-plc/sce.l))
manufacturers of carbon fibre reinforced ceramic materials, announced today its 
half-year financial results for the six months ended 30 November 2018.

**Financial highlights**

· Revenue decreased 3% to £509k (H1-2017: £524k)

· Gross profit increased 13% to £322k (H1-2017: £286k)

· Loss before and after tax increased 15% to £1,482k (H1-2017: £1,294k)

· Cash at 30 November 2018 was £745k (31 May 2018: £923k)

· Successful equity placing raising £1,466k (net of expenses) in the period

· Capital expenditure on property, plant and equipment of £156k (H1-2017: £684k)
mainly related to the installation of OEM Production Cell One

· Inventory of £1,062k (31 May 2018: £855k)

**Sales and Operational Highlights**

· Successful testing for OEM5 with all the key engineering tests completed satisfactorily
and also received approved supplier status to OEM5 including confirmation that the
Company meets VDA 6.3 (and IATF 16949) standards

· Continuing progress on testing for OEM3

· Delay of six months to SOP confirmed by OEM6 but no impact on lifetime revenues
and discussions started for follow on OEM6 vehicle

· Capital expenditure on OEM Production Cell One virtually completed with phase 
one capacity expected to be operational in summer 2019

· Company secured accreditation to new quality standard IATF 16949 and Environmental
standard ISO 14001

· Post balance sheet date, Company migrated its computer systems to a new enterprise
system compatible with the needs of the German automotive OEMs.

**Financial Review**

Revenue in the period decreased slightly to £509k (H1-2017: £524k) and the split
between retrofit and near OEM was comparable to last year. Sales to OEM6 were due
to commence in March 2019 but as previously announced, SOP has been delayed by six
months. However, this has no impact on sales in this reporting period.

Gross profit increased to £322k (H1-2017: £286k) and gross profit margin was 63%(
H1-2017: 55%), the movement resulting from cost reduction activities beginning to
have an effect at the new plant.

Administrative expenses increased to £730k (H1-2017: £547k) primarily due to higher
insurance costs, upgrades to the IT infrastructure in the business and increased
headcount.

Research expenses increased slightly to £1,073k (H1-2017: £1,033k) due to continuing
focus on delivering final product to target OEM customers. The continued high spend
was primarily due to increased cost of engineers and extensive external testing 
together with material costs to deliver these programmes.

Cash at the end of the half-year was £745k (31 May 2018: £923k). In the period the
Company successfully placed 9 million shares at 17 pence each in an oversubscribed
placing raising net proceeds of £1,461k.

Loss per share was 1.22p (H1-2017: 1.17p).

**Progress with potential OEM Customers**

The Company continues to test products with customers as described in recent announcements

OEM5: Further progress has been made with German OEM5 during the period. The customer
has advised that they intend to select the disc supplier for the target car in the
spring.

As previously notified, the customer is approving the Company’s disc with both a
slightly modified “traditional” pad as well as a more environmentally friendly pad.
This has slightly delayed testing; nonetheless the tests have gone well, with the
products comfortably passing all the key criteria on the critical tests. However
because the pad-disc configuration is now different from the original testing some
regulatory tests need to be repeated in February and March 2019; the Board is not
concerned about the time implications on the overall project of these relatively
minor repeat tests.

Additionally OEM5 has reviewed the Company’s quality processes, logistics capability,
financial strength and capacity plan and has approved Surface Transforms as a potential
supplier to them. The Company has been informed, “… it is now officially possible
for (OEM5) to place orders under the condition that the development department is
happy with the required performance of ST discs”. As part of this process their 
quality team completed an onsite brief review of the Company’s compliance with VDA
6.3 (and IATF 16949) and confirmed compliance.

The Company has broadly agreed initial pricing and is in the process of agreeing
commercial terms.

OEM3: Work on passing the OEM3 rig test continues with good progress having been
made in the period on understanding the reason for process variability and reducing
the variability in subsequent tests. Whilst results have improved, the Company is
not yet consistently meeting the performance criteria of OEM3. However, this work
is expected to complete in the next few months, consistent with the next round of
nomination dates.

OEM6: As signalled in the trading update on 4 December 2018 there is a delay (now
confirmed) of six months to the SOP of the car originally scheduled for SOP in June
2019 – which implied SOP in March 2019 for Surface Transforms. The delay has nothing
to do with any brake system parts. Discussions are continuing on both the precise
new SOP date and amelioration of the cost of this delay to the Company. In the meantime,
the Board is not changing the previous advice provided regarding the risk to current
year sales of £500k but with no impact on lifetime revenues from the project itself.

The Company has also begun discussions with this customer on the next car model 
that is expected to have significantly higher volumes than the current model. Unsurprisingly(
as it involves the same customer personnel) the delays on the current model are 
slowing discussions on the new model; nonetheless the customer has told us of their
wish to keep the “blood line” between the two cars, a statement the Board believes
to be promising for ultimate selection.

Aerospace: The Company is still awaiting the outcome of discussions between the 
landing gear manufacturer, airframe builder and the US DOD on its request for pre
funding before undertaking any further work on this project.

**Knowsley facility**

OEM Production Cell One: Capital expenditure on OEM Production Cell One is virtually
complete. The final furnace for this cell has successfully completed a number of
production runs at the supplier’s premises but as a further risk mitigation exercise
the decision has been made to complete the manufacture of the OEM6 production parts
in Germany and then ship the furnace in Q2 of the calendar year. This would then
give the Company time to successfully commission the new furnace before the production
is required from this furnace for the next series of new programmes.

The other furnaces are either in production or finalising software installation.
The Company continues to expect OEM Production Cell One to be operational in summer
2019.

Environmental awards and permits: The Company was awarded the environmental standard
ISO 14001 in November 2018. The Company is concluding its discussions with the Environmental
Agency on securing all the necessary permits for full capacity volume production
of OEM Production Cell One.

VDA 6.3 and IATF 16943: As previously notified, conformance with the stand-alone
German VDA certification has always been a pre requisite to supply to the German
automotive industry. Historically, Surface Transforms conformed with TS 16949, which
many German OEMs considered to be less demanding than the German developed VDA 6.3.
TS 16949 has been superseded by the new International Automotive Task Force (IATF)
quality standard 16949, which German OEMs now see as equivalent to VDA 6.3. Surface
Transforms secured accreditation to this standard in July 2018. This does not remove
the need for on-going customer quality audits but they are much more “light touch”
looking for evidence of continuing conformance with the standards. The first of 
these audits was conducted by OEM5 in the period and was completed to their satisfaction.

Computer Systems: German OEMs require their suppliers to have computer compatibility
with their computer systems; in practice this has meant the Company migrating to
the SAP computer system. After extensive work this transition took place, post balance
sheet date, in December 2018. There were some inevitable disruptions in December
and January but the factory and internal processes are now running smoothly again.

**Outlook**

The Company signalled a change in the outlook for the current financial year in 
a trading update on 4 December, reflecting a concern on the SOP date for OEM6. This
slippage has now been confirmed as being six months, in line with the concerns expressed
at that time. There are no further changes to expectations for the current year.

The outlook for the next financial year ending 31 May 2020 is unchanged in respect
of automotive sales but the on-going lack of clarity on the potential aerospace 
contract, hazards £600k of forecast sales in that year, albeit there is still time
to resolve the financial discussions between the key parties.

The Company reaches cash break even when OEM 6 enters production in the financial
year 2019-20. Thereafter the outlook is clearly dependent upon winning the expected
OEM contracts described above which are scheduled for start of volume production
in the 2021 to 2022 calendar years. The Board remains optimistic about being awarded
these potential contracts.

**Summary**

The Company continues its journey from a development company to a mainstream volume
automotive supplier with a site capable of revenues of £50m per year in a market
that could ultimately reach £1 billion.

The delay on SOP for OEM6 is frustrating but has no medium-long term impact on the
fortunes of the Company and, indeed, the Company continues to expect follow on orders
on new models from this customer. Equally importantly, after a number of frustrating
years and delays, the past six months has seen particular progress on testing at
both OEM5 and OEM3.

The task in the remainder of the financial year is to turn this progress on testing
into firm orders. The Board remains confident of delivering this objective.

In respect to operations, the improvement in gross margin percentage demonstrates
the impact of the investment and cost reduction programme over recent years. The
new, cost competitive, first commercial cell of the factory will be operational 
mid year – consistent with the capacity needs of target customer programmes. Additionally
the Board is now confident that that the factory has the quality systems, computer
infrastructure and internal processes required to be successful as a mainstream 
automotive supplier.

Finally may I conclude by recording the Board’s appreciation of the outstanding 
contribution by all members of staff. Thank You!

David Bundred

Chairman

Share on:
