# Solo Oil Plc Production Flow Test Operations – Horse Hill-1

- Link: https://www.directorstalkinterviews.com/solo-oil-plc-production-flow-test-operations-horse-hill-1/412753448
- Published: 2018-06-27T07:06:35+01:00
- Author: Giles Arbor

**Solo Oil plc** (LON:SOLO) has today announced that it has been informed by Horse
Hill Developments Ltd, the operator of the Horse Hill-1 Kimmeridge Limestone 3, 
KL4 and Portland oil discovery, that planned flow testing operations of HH-1 have
commenced. All key equipment necessary to carry out a 150-day long-term extended
flow test campaign at HH-1 is now on site. The Company holds a 9.75% beneficial 
interest in licence PEDL137 containing the HH-1 oil discovery.

Following final equipment set-up and the subsequent removal of three temporary suspension
plugs in the HH-1 wellbore, flow will first be re-established from the Portland 
sandstone oil pool. Testing of each of the KL4 and KL3 oil pools will follow completion
of the Portland test sequence.

> **Neil Ritson, Solo Oil Plc Chairman, commented:** “We are extremely pleased to
> see that, following receipt of all regulatory approvals, HHDL has moved quickly
> to mobilise the necessary equipment and is now due to start the extended well 
> tests in the immediate future. These tests, aimed at establishing commerciality
> are a critical part of the pre-development phase and we remain enthusiastic about
> the potential outcome for our investors.”

**Extended Well Test (“EWT”) Overview**

As the 2016 short flow test campaign established commercially viable initial flow
rates for each of the Portland, KL4 and KL3 zones, the 2018 EWT’s prime goal is 
to confirm that the wellbore is connected to a commercially viable oil volume within
one or more of the three zones.

The long term reservoir performance data is also expected to provide the necessary
data to enable, for the first time, Petroleum Resources Management System compliant
Kimmeridge and Portland reserve figures to be estimated at Horse Hill.

Each test sequence will include a short, optimised rate test, together with a sequence
of “choked back” (i.e. reduced) steady-state flow periods necessary to obtain the
data required to determine the connected oil volume within each zone. A series of
associated long pressure build up tests are also planned. Oil produced from the 
EWT will be sold on the “spot” oil market and any revenues will be utilised to offset
overall testing costs.

In a move to further minimise environmental impact, the EWT will utilise a new type
of clean-burning enclosed flare, a UK onshore industry first. The flare, utilising
technology from UK landfill sites, was developed jointly between Landfill Systems,
PW Well Test and UKOG, and is regarded as the best available and preferred technology
by the Environment Agency.

Qualified Person’s Statement: The information contained in this announcement has
been reviewed and approved by Neil Ritson, Chairman and Director for Solo Oil plc,
who has over 40 years of relevant experience in the oil industry. Mr. Ritson is 
a member of the Society of Petroleum Engineers (SPE), an Active Member of the American
Association of Petroleum Geologists (AAPG) and is a Fellow of the Geological Society
of London (BGS).

Share on:
