# PowerHouse Energy Group plc Interim Results & Chairman Statement

- Link: https://www.directorstalkinterviews.com/powerhouse-energy-group-plc-interim-results-chairman-statement/412736902
- Published: 2017-09-27T07:27:17+01:00
- Author: Giles Arbor

**PowerHouse Energy Group plc** (LON:PHE), the company focused on ultra-high temperature
waste-to-energy and waste-to-hydrogen systems, and the creator of Distributed Modular
Gasification (DMG©), announced today its unaudited interim results for the six months
to 30 June 2017.

**H1 2017 Highlights**

**Operational**

 * Delivery of the G3-UHt ultra-high temperature gasification demonstration unit
   to the UK and successful testing and re-commissioning completed
 * DMG© – Continued process and engineering development of DMG© technology platform
   to convert waste to energy and to extract hydrogen from waste (HfW)
 * Board strengthened – appointment of David Ryan as Executive Director of Programme
   Development
 * Appointment of Chris Vanezis as CFO
 * Creation of and appointments to Advisory Panel

**Financial**

 * Equity fundraisings totalling £2.75 million to support the development of DMG
   and the Company’s commercialisation phase
 * Repayment and elimination of the onerous Hillgrove Loan Note

**Post-period Highlights**

**Operational**

 * Second phase of recommissioning and first extended technical trial successfully
   completed
 * MOU with EEH, Qatar
 * Cameron Davies appointed as Non-Executive Chairman, effective from 3 October 
   2017

**Financial**

Additional £1.6m raised in August via a placing of new ordinary shares at 1.0p
 
Net cash balance at end of August 2017 of £181k. This does not include the funds
raised above which had fully cleared to the Company’s bank account by 11 September
2017

 

PowerHouse Energy Group plc is the developer of the G3-UHt Ultra High Temperature
Gasification unit, and the creator of the Distributed Modular Gasification (DMG)
© system which allows for the distributed elimination of waste, the generation of
distributed electricity, and the production of distributed hydrogen with the world’s
first hydrogen from waste process (HfW).

The Company is focused on technologies to enable projects for energy recovery from
municipal and industrial waste streams that would otherwise be directed to landfills
and incinerators; or from renewable and alternative fuels such as biomass, tyres,
and plastics to create synthesis gas (syngas) for power generation, or high-quality
hydrogen as a fuel for transport. DMG© allows for easy, economical, deployment and
scaling of an environmentally sound solution to the growing challenges of waste 
elimination, electricity demand, and distributed hydrogen production.

**Chairman’s Statement**

**Introduction**

The first six months of 2017 has been an exciting period for PowerHouse that saw
a rapid increase in activity both in terms of technical development and financial
restructuring.

The delivery of the Company’s G3-UHt Ultra-high temperature gasification unit (G3
UHt Unit) to the UK in early 2017 and its re-siting and re-commissioning at the 
Thornton Science Park Energy Centre successfully concluded the initial testing phase
of our proprietary technology. The confirmation of the G3-UHt Unit’s ability to 
operate at target temperature and its re-commissioning were completed in accordance
with applicable UK Health, Safety, and Environmental regulations and standards. 
A regular programme of demonstration, testing, enhancement, and consistent operation
is underway at the Energy Centre and the Board believes that Distributed Modular
Gasification (DMG©) has truly begun its industry disruptive journey.

**Our technology**

The focus for PowerHouse in recent years has concentrated on the efficient generation
of energy from waste, but increasingly we see exciting prospects for the ability
to convert waste into hydrogen. Our small footprint, our high-temperature process,
and our ability to generate a concentrated volume of hydrogen on a distributed basis
sets us apart from others. This process, DMG ©, has led to one of the world’s first
distributed hydrogen from waste (HfW) design.

DMG© enables the thermal-molecular conversion of waste into an energy-rich syngas.
The syngas can be used immediately to generate low emission electrical energy which
can be used locally, thereby leveraging private line or micro-grid connections on-
site. If appropriate, it can be sold directly into the National Grid.

We believe that DMG© is a disruptive technology that could fundamentally change 
the waste-to-energy market. DMG© is a mechanism for the eradication of waste, the
generation of distributed electricity, and, most importantly, the production of 
distributed hydrogen – HfW – which we believe will help unleash the hydrogen economy
by providing hydrogen as a road-fuel as the demand for Fuel Cell Vehicles (FCVs)
ramps up.

**Operations**

The arrival of the G3-UHt Unit in the UK in March saw the start of a programme of
engineering activity to ensure that the unit would safely and securely operate in
accordance with UK Health, Safety, and Environmental guidelines. The work followed
a comprehensive knowledge transfer from the Ore-Pro team (our prior external engineering
partners) to our UK based engineering staff and included extensive upgrading of 
componentry, the installation of advanced automation, and the integration of appropriate
safety controls for the system. The unit was completely deconstructed, examined,
tested, and reconstructed to ensure its ideal operational condition.

During this period the system was moved from its initial commissioning site to its
current location in Unit 99 of the Energy Centre at the Thornton Science Park, operated
by the University of Chester. This was purpose-built as an emissions test facility
for Shell Research and is an ideal location for the continuous operation, demonstration,
and improvement of the G3-UHt Unit. The Company has established an active engineering
programme at the Centre and has taken a two year lease on its facilities there.

In April 2017 the Company announced that the first phase of the re-commissioning
of the G3-UHt Unit had been completed, with the successful production of syngas 
from the system. The G3-UHt unit operated at a temperature of over 1000 degrees 
Celsius, demonstrating its capacity to successfully gasify many historically difficult
waste materials and generate synthesis gas.

The second phase of re-commissioning saw a number of improvements and modifications
made to the system, ahead of the scaling up necessary for commercial deployment.
These included the enhancement of the gas-handling systems, refurbishment of the
feed and steam generation systems and the complete redesign and introduction of 
programmable safety and control systems. During the test, the Company recorded a
maximum peak flow rate of over 50 cubic metres per hour of syngas.

Following a robust programme of testing and technical data collection, the Company
announced the completion of its first extended technical trial of the DMG© gasification
process at the Energy Centre at Thornton Science Park on 31 July 2017.

Operating on a feedstock of tyre crumb, PowerHouse engineers were able to demonstrate
control of the process at ultra-high temperature which generated a syngas that, 
according to onsite, in-line, analytical instrumentation, was greater than 50% hydrogen
by volume. The remaining, measurable, constituent elements of the syngas were CO(
carbon monoxide) and CH4 (methane.) Importantly, the in-line gas analysis equipment
detected absolutely no CO2 in the gas stream generated by the Unit. A more rigorous
analysis of the syngas produced in the DMG process will be conducted by certified
external laboratories in future trials.

**Strategic alliances and Relationships**

The accomplishments achieved in H1 2017 were underpinned by a number of strategic
alliances with influential partners.

Over the past several years, the Company has been working with Waste2tricity, Thailand,
in an effort to develop a pipeline of projects in that country. The experience of
working with Waste2tricity principals made establishing a UK centric relationship
between our two entities a clear option and in January 2017 PowerHouse entered into
a 24 month project development relationship with Waste2tricity, Ltd. The initial
results of that relationship have led to a substantive expansion of our UK capabilities,
relationships with other industrial partners, and a pipeline of commercial opportunities,
in the UK, and elsewhere, under consideration.

Among the introductions made by Waste2tricity on behalf of PowerHouse was to Peel
Environmental (Peel). This relationship led to the Memorandum of Understanding announced
on 6 February 2017 between the Company and Peel to negotiate potential participation
at Protos, Peel’s expansive energy park near Chester. Our relationship with Peel
continues to grow and develop and, through their introduction, led to the siting
of our G3-UHt demonstration unit at the newly established Energy Centre at the Thornton
Science Park, part of the University of Chester. This base is the hub of our future
R&D activities in co-operation with the University of Chester, including the sponsorship
of a PhD program to further the science behind Ultra-high Temperature Gasification
and the expansion of DMG©.

On 30 January 2017, Yady Worldwide SA made an investment of £250,000 into the Company,
showing an early commitment to the G3-UHt Unit and the continued development and
roll-out of DMG©. Yady further contributed £500,000 to a £2.5 million placing in
February 2017.

The appointment of EngSolve, Ltd as our principal engineering partner, announced
in March, to assist in the re-commissioning of the G3-UHt Unit, has proven to be
extremely productive and we look forward to a long-standing and successful relationship
with their talented engineering team. We are working closely with the EngSolve team
on our commercial design efforts.

In June, the Company announced a collaboration agreement with a major UK partner
involved in the development of energy and waste projects. The partner has committed
two tranches of funding of up to £500,000 in aggregate to meet the cost of preparing
and funding applications for planning permission and environmental permits of the
initial demonstration unit and first five PHE Waste-to-Energy G3-UHt systems. The
agreement will require PowerHouse to supply five systems at locations of the partners’
choosing on a prioritised basis, based upon the completion of UK Certifications 
and demonstration of the G3-UHt unit in active operation. £100,000 of this commitment
was released in July to fund the planning development of the Company’s first commercial
sites.

**Risk Reduction and Funding**

The Board made the strategic decision to negotiate the retirement of the Hillgrove
loan note (Note) with a combination of cash and shares.

The retirement of the Note was a significant milestone for the Company as there 
is no longer a financial impediment to its growth and operation.

The Note was accruing interest at a rate of 15% per annum and had reached a value
of £3.4M. The coupon on the Note would add approximately a half-million pounds of
fully secured debt to the Company each year.

The decision was taken to raise £2.5 million in a private placement and to repay
the Note with £2 million in cash, and issue £1.4 million worth of shares at the 
conversion price of 0.5p. Hillgrove has agreed to release its debenture over the
Company’s assets and IP upon the final settlement of the share issuance. 280,430,920
shares will be issued in due course to Hillgrove as it had agreed to a 12 month 
lock-in period and a continuing Relationship Agreement with the Company. Hillgrove
has the right to nominate a suitably acceptable Director to the Board at its discretion.

The remainder of the proceeds of the 15 February 2017 placement provided capital
for the continued operations of the Company.

After the period end, on 24 August 2017, a further £1.6m was raised through a placing
of new ordinary shares at 1.0p to fund further development.

**The PowerHouse Team**

The company has made a number of significant appointments to strengthen the board
and management team.

David Ryan was appointed as a Non-Executive Director in late February 2017, and 
on 20 March 2017, became Executive Director of Programme Development, overseeing
the technical operations of the Company. Introduced to PowerHouse by Waste2tricity,
David was the former CEO and Managing Director of Thyssenkrupp Industrial Solutions’
Oil & Gas Business Unit for the UK. Prior to his employment with Thyssenkrupp, he
founded and built a successful engineering consulting organisation, Energy & Power
Limited, which was acquired by Thyssenkrupp in 2012.

With over 30 years of complex engineering, business development, and project management
experience, David is an expert in sophisticated design engineering and brings a 
breadth of project delivery, international business management, and general engineering
acumen to the management team. David has been instrumental in the successful siting
and re-commissioning of the G3-UHt Unit at Thornton Science Park and continues to
work on the design and development of the Company’s commercial platform, DMG©.

Chris Vanezis joined the PowerHouse management team as Chief Financial Officer, 
bringing an extensive background in financial accounting and waste-to-energy finance
management. In addition, the first site personnel in the UK were hired, based at
Thornton Science Park.

Clive Carver resigned from his position as Non-Executive Director in May after serving
on the Board for one year.

The first half of the year also saw the new creation of an experienced, knowledgeable,
and well-connected Advisory Panel consisting of Peter Jones OBE, Keith Riley, Myles
Kitcher, Roudi Baroudi, and Howard White. The value of the Advisory Panel is leading
to an acceleration of our commercial activities as is evidenced by the MOU announced
20th September 2017 between PowerHouse and EEH regarding potential HfW activities
in Qatar for broadly rolling out the Company’s DMG© platform.

Of significant note is the Company’s appointment of Dr. Cameron Davies as Non-Executive
Chairman of the Board of Directors, announced on 24 August 2017. Dr. Davies’ many
accomplishments, his extensive experience, and his steady hand will serve the Company
well as we move forward. Having known Dr. Davies for nearly a year now, I am eager
for his tenure to commence. His appointment bodes well for the future of PowerHouse
and it is anticipated that his appointment will take effect on 3 October 2017. On
Dr. Davies’ appointment I will relinquish my position as Executive Chairman to become
the Chief Executive Officer of the Company.

**Current trading and Outlook**

The first half of the year has seen a tremendous amount accomplished by the Company
and the recent placing, raising £1.6 million has provided the funding we require
to begin revving our commercial engine.

We have created what we believe to be a disruptive philosophy in DMG©: distributed
waste destruction; distributed electrical generation; distributed hydrogen production.
We have taken a contrarian approach to the megaliths of the past and believe in 
bringing the solution to where the problem lies. We are positioned to do something
powerful for communities across the UK and throughout the world. We believe that
DMG© today is but a ripple in the pond but that in time it will help redefine how
our environment is managed and play a key role in the evolution of transport, – 
as the ripple turns into a wave of opportunity for positive change in our world.

PowerHouse Energy Group plc no longer sees itself solely in the Waste to Energy 
category of companies, but now Waste to hydrogen. We are convinced that the hydrogen
economy is coming and that we have a big part to play. And DMG© will help fuel our
future. Cleanly.

As always, we appreciate your continued support.

Keith Allaun
 Executive Chairman 27 September 2017

Share on:
