# PowerHouse Energy Group plc Electricity Production with DMG

- Link: https://www.directorstalkinterviews.com/powerhouse-energy-group-plc-electricity-production-dmg/412746624
- Published: 2018-03-02T07:11:36+00:00
- Author: Giles Arbor

**PowerHouse Energy Group plc** (LON:PHE), the UK technology company pioneering 
hydrogen production from waste plastic and end-of-life tyres, is pleased to provide
an update on progress with the demonstration system at the University of Chester’s
Thornton Science Park.

The DMG® (Distributed Modular Gasification) demonstration system was successfully
commissioned last summer after a complete rebuild and upgrade on its arrival in 
the UK. The system has continued to operate as expected over a period of nearly 
six months with a variety of feedstocks producing high-quality synthesis gas (“syngas”)
safely and efficiently. Independent engineering analysis of the gas produced by 
tyre crumb has determined that the syngas can be adequately purified to provide 
a 99.999% pure stream of road-fuel-quality hydrogen while in parallel generating
electricity from excess syngas.

Thus far in 2018, the testing program at the Thornton site has been concentrated
on plastics – our initial targeted commercial feedstock. Both native plastic and
waste plastic feedstock have been tested under a variety of pre-determined conditions
to produce hydrogen-rich syngas and syngas for electrical generation.

The penultimate aim of the testing program has been the successful operation of 
the Company’s gas generator system for the production of electricity. The gas generator
set has been operated on the syngas streams derived from each native and waste plastic
using the syngas produced by the DMG® system for internal load operations. The data
derived from this testing program is contributing substantially to the front-end-
design engineering program for our first commercial project targeted at the Ellesmere
Port area as announced previously. Subsequent to initial commercial operations the
Company will finalise the engineering of the ultimate aim of the DMG® System: hydrogen
production.

The next stage of electrical production testing for the DMG® system will include
connection of the generator to the Energy Centre’s micro-grid at Thornton Science
Park. The site engineering for the micro-grid connection is under way and is being
managed by the Energy Centre, with the expectation that the PowerHouse system will
support the operation of the centre’s combined heating and power plant and other
independently operated electrical components.

> **David Ryan, Technical Director of PowerHouse Energy Group plc, commented:** “
> The results of the plastics testing have been very encouraging and allow us to
> feed valuable data into our rapidly advancing commercial process design. We continue
> to use the data derived from our process demonstration unit in our ongoing dialogue
> with prospective manufacturers and to aid and accelerate our planning and permitting
> processes.”

Share on:
