# Panthera Resources 5000 metre RC drill programme commenced at Labola

- Link: https://www.directorstalkinterviews.com/panthera-resources-5000-metre-rc-drill-programme-commenced-at-labola/412993858
- Published: 2021-05-28T07:08:21+01:00
- Author: Giles

**Panthera Resources Plc** ([LON:PAT](https://www.directorstalkinterviews.com/company/panthera-resources-plc/pat.l)),
the diversified gold exploration and development company with assets in West Africa
and India, has today announced that the Reverse Circulation (RC) drill rig has arrived
on site at the Labola (Wuo Land) Project in Burkina Faso and the planned 5,000m 
drilling programme has commenced. 

**Highlights**

·       5000 metre RC drill programme commenced at Labola (Wuo Land)

·       Drilling will primarily support a maiden resource estimate

·       Several exploration targets will also be drill tested

·       Assay results expected from quarter three of 2021

Further information on the planned work programme at Paimasa, inclusive of images,
is available on the Company’s website or by following the link below:

[1619A_1-2021-5-28](https://www.directorstalkinterviews.com/wp-content/uploads/2021/05/1619A_1-2021-5-28.pdf)
[Panthera PDF](https://www.directorstalkinterviews.com/wp-content/uploads/2021/05/1619A_1-2021-5-28.pdf)

**Current Work Programme**

Panthera’s associated company, Moydow Holdings Limited (“Moydow”) has designed the
drill programme to support the preparation of a resource estimate in accordance 
with JORC or NI43-101 standards.  The drilling will test a subset of previous drill
results obtained by High River Gold Mines Limited (later acquired by Nord Gold SE)
and Taurus Gold Limited during the period 2008-2012, which totalled 65,556m RAB/
RC/DD drilling in 541 drillholes. 

The drill programme will also examine the coarse gold component of the mineralisation
via the accelerated cyanide leach technique “LeachWell”.  The data generated from
the LeachWell programme will  complement Moydow’s assessment of whether historical
historical assay results have potentially under reported the gold grades, although
there can be no certainty that this has occurred.  In addition to the resource estimate
drilling, 2,600 metres of drilling will target new exploration targets at Labola.

Other ongoing work at Labola in support of a future mineral resource estimate includes:

·        combining of all previous data into a single database;

·     compiling and examining quality assurance and quality control (QaQc) data 
for the previous drilling and locating drillhole collars on the ground where possible;

·        re-logging of drill core from several drill-holes, designed to establish
controls on mineralisation;

·       commissioning of up to date (February 2021) 0.3m resolution satellite imagery(
Worldview 3) and production of a digital terrain model (DTM), 1m and 0.5m topographic
contours, and rectified 0.3m resolution imagery; and

·        identification and mapping of all artisanal workings and estimation of 
volumes of material moved.

The drill results from the planned work programme are anticipated from quarter three.

**Technical Details**

The Labola (Wuo Land) gold project is located in southern Burkina Faso, approximately
380km southwest of the capital city Ouagadougou. The area is located within the 
Banfora Greenstone Belt, comprised dominantly of Birimian aged metasediments with
lesser metavolcanics and felsic intrusions.  It contains numerous artisanal workings
over at least 14,000m strike within the tenement area.  These workings appear to
be targeting high grade shoots within individual quartz veins that are located within
an extensive zone of shearing, sheeted to stockwork quartz veining and silica-sulphide
alteration.

Previous explorers have completed 65,556m RAB/RC/DD drilling in 541 drillholes. 
That work has outlined numerous extensive zones of gold mineralisation over the 
entire 9km of strike tested.  This mineralisation has been wireframed by previous
explorers.  Mineral resources have been estimated by previous explorers within these
wireframes, but they cannot be reported under JORC or NI43-101 guidelines at this
stage, largely due to their historical nature.  Some of the previous drilling is
quite broad spaced and, although gold mineralisation has been intersected, additional
drilling is required to firm up the mineralisation outlines.

Work by Panthera and Moydow has shown that excellent potential exists to convert
the historical resource estimates to a maiden resource estimate by Moydow in accordance
with JORC or NI43-101 guidelines.  The drilling programme will confirm the historic
database and support Moydow’s efforts to prepare a maiden resource estimate.  The
programme includes increasing drill density where required, drilling along strike
and down dip of known mineralisation, drilling untested artisanal gold workings 
and their extensions, and drill testing geophysical anomalies, in particular combined
IP chargeability and resistivity anomalies that appear to define mineralisation 
very well due to the sulphidic alteration and silicification associated with gold
mineralisation.

The drill samples from the current drill programme will be analysed both using convention
fire assay techniques as well as by the accelerated cyanide each technique “LeachWell”
that uses a much larger sample (2-5kg) and hence minimises the statistical effects
of coarse gold, which is known to be common in this area.  Drilling for this purpose
will focus on the two largest areas identified by previous explorers and will twin
existing drill holes.

In addition to the confirmatory drilling, two areas with no previous drilling have
been selected for drill testing designed to identify additional mineralisation. 
This drilling has been designed to test a 350 metre gap along strike in the previous
drilling in the western zone and the northern continuation of previous drilling 
in the central zone.  Both these areas have associated artisanal mining activity
and IP chargeability and resistivity anomalies.

Share on:
