# Hardide sets out clear case for precision stainless steel passivation

- Link: https://www.directorstalkinterviews.com/hardide-sets-out-clear-case-for-precision-stainless-steel-passivation/4121255760
- Published: 2026-07-07T13:10:00+01:00
- Author: Amilia Stone

Hardide has explained why the choice between citric and nitric acid passivation 
depends on application requirements, process control and the condition of the stainless
steel surface before treatment.

Passivation is used to improve the corrosion resistance of stainless steel components
by removing free iron and surface contamination. This allows a protective chromium
oxide layer to form, helping parts perform reliably in demanding environments.

Nitric acid passivation is the traditional approach and remains widely used across
industry. It is well understood, proven and suitable for many critical applications.
However, it involves more hazardous chemicals and can require stricter handling,
safety and waste controls.

Citric acid passivation has grown in use as a safer and more environmentally acceptable
alternative. It can offer easier handling and waste treatment while still meeting
recognised passivation standards. For manufacturers looking to reduce chemical risk
without compromising technical requirements, it can be an attractive option.

Hardide makes clear that neither process is automatically better. Both citric and
nitric acid passivation can deliver strong corrosion resistance when they are properly
specified, controlled and tested. The key issue is not simply the acid used, but
the quality of the full process.

Surface preparation is central. Oils, grease, machining residues, oxides and other
contaminants must be removed before passivation begins. If the surface is not properly
cleaned, the final result can be inconsistent, even when the passivation chemistry
is correct.

Factors such as solution concentration, temperature and immersion time must be managed
carefully. Testing then confirms whether the passive layer has been formed correctly
and whether the component meets the required standard.

The choice between citric and nitric acid also depends on practical considerations.
These include the grade of stainless steel, part geometry, customer specifications,
regulatory needs and environmental priorities. In many cases, these factors will
decide the best route more than the chemistry itself.

_**Hardide plc** (LON:HDD) is a pioneer in advanced tungsten/tungsten carbide CVD
coatings. They showcase unmatched capabilities to greatly extend the life of complex
geometry components facing extreme wear, erosion and corrosion._

Share on:
