# Hardide Plc Q&A: Airbus Global Approved Supplier Status Gained (LON:HDD)

- Link: https://www.directorstalkinterviews.com/hardide-plc-qa-airbus-global-approved-supplier-status-gained-lonhdd/412726687
- Published: 2017-04-04T12:07:39+01:00
- Author: Amilia Stone

**Hardide Plc** (LON:HDD) Chief Executive Officer Philip Kirkham caught up with 
DirectorsTalk for an exclusive interview to discuss their ‘Approved Supplier’ status
from Airbus

 

**Q1: Now Phil, an announcement out today that Hardide Coatings has gained ‘Approved
Supplier’ status from Airbus, can you explain for us the significance of this?**

**A1**: Certainly, we absolutely delighted to have this today and it’s the completion
of a long process with Airbus going back over 8 years. We’ve now got the, what they
call, the industrial qualification process which has enabled us to have the Approved
Supplier status and we can’t really overestimate the significance of this. All the
previous work we’ve done over the 8 years, in terms of getting the actual technical
approval of the coating back in December 2015 and all the development work is really
a prelude to this and none of that really generates potential business until you’re
actually approved to supply. So, this announcement today is really a culmination
of all that and is really the key stage now enabling us to go forward commercially
with Airbus.

We’re currently in discussion with a number of Airbus sites about specific components
on a whole range of aircraft and the aerospace is obviously a key market for us 
and this should enable us to be seen more credible throughout the whole industry
and open up some opportunities for growth in other aerospace companies other than
Airbus.

We currently do business with people like BAE Systems and Leonardo Helicopters and
to achieve this Approved Supplier status from Airbus is a really significant enabler
for the company’s growth in the European and North American and global aerospace
markets which all have enormous potential for the Hardide coating technology.

 

**Q2: As you say, the Hardide-A tungsten-carbide coating has been approved as an
alternative to hard chrome plating on specific Airbus components, can you tell us
why Airbus and other aerospace manufacturers want to replace hard chrome plating?**

**A2**: Certainly, well, hard chrome plating has been used widely within the aerospace
industry for many many years. However, some of the chemicals used in the process
of hard chrome plating have been banned under the European REACH regulations from
September 2017, although we believe there’s going to be an extension to that that’s
been granted by the European Chemical Agency but I don’t think it’s yet been approved
by the European Parliament, but it’s highly likely to be. So, because of the health
and safety concerns and the chemicals ban has effectively banned hard chrome plating
and increasingly tight restrictions imposed from the USA on health and safety grounds
on the use of hard chrome as well.

So, this opens up great opportunities for our Hardide-A tungsten-carbide based coating
which has been developed over many years in conjunction with work we’ve been doing
with Airbus. So, finding an alternative coating that has the same or better properties
than hard chrome plating has not been simple and manufacturers have been struggling
to find alternatives for many years and today there are a few alternatives and the
most common one being called high velocity oxy-fuel (HVOF) and some other spray 
coatings have been considered the best available. However, Hardide-A has been specifically
developed for this application and provides several very significant advantages 
over HVOF and other spray coatings as it’s generated from the gas phase process 
and it has the ability to coat very complex geometric shapes and internal surfaces
and has improved corrosion and fatigue-resistance and a low friction coating as 
well.

Back in December 2015, after a long period of trials and development work the coating
was technically approved by Airbus as a potential to hard chrome plating. Since 
then we’ve been working very closely with the Airbus engineers to ensure the process
of actually making the coating meets all the stringent specifications and requirements
that Airbus demand. I’m delighted now that we’ve now proven that and succeed this
full industrial approval for the whole complex process that we have to create Hardide
and now, Airbus and component suppliers to Airbus are now able to place production
orders on us for actual aircraft components. So, today is a great milestone really
in the history of Hardide.

 

**Q3: And the timing couldn’t be better?**

**A3**: Absolutely, yes, and the aerospace industry is very buoyant and with increasing
demand on aircraft. For example, the Airbus A320, the common single-aisle aircraft,
the high volume one, they’re increasing the production rate up to 60 aircraft a 
month over the next couple of years. So, the aerospace industry is very buoyant 
and projected to increase in demand over the foreseeable future.

Share on:
