# Firering Strategic Minerals expands lithium mineralisation at Atex project in Côte d’Ivoire

- Link: https://www.directorstalkinterviews.com/firering-strategic-minerals-expands-lithium-mineralisation-at-atex-project-in-cote-divoire/4121162012
- Published: 2024-05-02T07:13:00+01:00
- Author: Amilia Stone

**[Firering Strategic Minerals plc](https://www.directorstalkinterviews.com/company/firering-strategic-minerals-plc/frg.l)**(
LON:FRG), an exploration company focusing on critical minerals, is pleased to announce
assay results from its Reverse Circulation campaign at its Atex Lithium-Tantalum
Project in Côte d’Ivoire.

**HIGHLIGHTS**

·    Expanded known lithium mineralisation by 122%, stretching the strike length
to 800m.

o  80m NNE (TVRC0009) and 712m SSW (TVRC0005) from diamond core hole TVDD004.

·    Positive assay results within the Atex license area, with notable intercepts
including 15m at 0.74% Li_(2)O from 118m and 6m at 1.59% Li_(2)O from 118m (TVRC0009).

·    Assay results confirmed promising lithium potential within the license area,
aligning with the broader lithium exploration success in the region.

·    Next stage to focus on expanding drilling exploration efforts in an easterly
and northerly direction and delineating a maiden resource at Atex.

> **Yuval Cohen, Chief Executive of Firering Strategic Minerals, said:** _“Our recent
> RC drilling efforts at Atex have yielded significant extensions to the known lithium
> mineralisation, expanding it by 80m in a north-north-easterly direction (TVRC0009)
> and 712m in a south-south-westerly direction (TVRC0005). This brings the total
> strike length of identified intermittent lithium mineralisation to 800m, which
> is a substantial 122% increase from the previous known strike length of 360m ascertained
> during our DD campaign in 2022. Noteworthy assay results include a positive intercept
> of 15m at 0.74% Li2O from 118m in hole TVRC0009, which encompasses a 6m section
> yielding an even higher grade of 1.59% Li2O._
> _“Our focus is now on expanding exploration efforts in an easterly and northerly
> direction within our Atex license area. This will involve increased drilling activities,
> with the ultimate goal of delineating a maiden resource in the near future.”_

**DETAILS**

**Lithium-cesium-tantalum (“LCT”) pegmatites within the Atex licence area**

The lithium bearing LCT pegmatites within the Atex Project area are hosted rocks
of the Birimian Supergroup within the Syama-Boundiali Greenstone Belt of northern
Cote d’Ivoire. These pegmatites form part of the larger Birimian-age (~2 Ga) pegmatite
province within the Baoulé-Mossi domain of the West African Craton, which is host
to a number of lithium bearing LCT pegmatite fields including those in southwestern
Mali, Ghana, south-western Niger, and Burkina Faso (Melcher et al., 2017). Ivory
Coast and the broader region is considered to have significant hard rock lithium
potential and is demonstrated by the success of a number of explorers in the region
that have advanced lithium projects for which Mineral Resource estimates and studies
have been reported, including:

·    Ewoyaa Lithium Project in Ghana for which Atlantic Lithium (AIM:ALL, ASX:A11)
announced its Definitive Feasibility Study (“DFS”) for the project in June 2023 –(
EWOYAA, GHANA – Atlantic Lithium Ltd);

·    Bougouni Lithium Project in southern Mali of Kodal Minerals (AIM: KOD.L) – 
Bougouni Lithium Project – Kodal Minerals; and

·    Goulamina Lithium Project in southern Mali for which Leo Lithium’s (ASX:LLL)
updated its DFS in December 2021 – Goulamina Project – Leo Lithium Limited.

Firering, currently the only lithium focused exploration company within Cote d’Ivoire
exploring the lithium bearing pegmatites, has focused on the central and southern
parts of the Atex licence. The northern parts of the licence area and broader region
are also considered prospective for pegmatite hosted lithium mineralisation and 
will be the focus of Firering’s next exploration activities.

On 9 April 2024, gold explorer Desert Metals (ASX:DM1) reported the discovery of
a lepidolite bearing pegmatite from air core drilling in the west of its Tengrela
South licence, which Firering believes is encouraging given this is approximately
2km north of the northern edge of its Atex licence and 12km NNE of its key target,
Spodumene Hill. The western extremity of the Tengrela South licence (PR-683) shares
its southern boundary with the northern edge of Firering’s Atex licence (PR-777),
and the two licences are geologically contiguous in this area comprising the north-
northeast striking metavolcanics and metasedimentary rocks of the Birimian.

**RC Assay Results**

The Company completed a 23-hole RC drilling campaign for a total of 3,753m ranging
from 80m to 200m depth, averaging 163m (Figure 1) in March 2024. Although 23 holes
were drilled, TVRC0001 and TVRC0002 were abandoned due to poor recoveries and redrilled
as TVRC0009 and TVRC0008 respectively.  Accordingly, the results for the samples
of the 21 holes submitted for assay have all been received and positive intercepts
are shown in Table 1.

Sections showing significant intercepts in holes TVRC0009, TVRC0020 and TVRC0005
are shown in Figure 3 and Figure 4 respectively.  A plan view of the location of
the sections is shown in Figure 2.

| ⌊8970045a 4f2a 4240 9ceb 5bbab0b9e575 (FRG)⌉ |

Figure 1: Map showing RC collars (2024 campaign) and DD collars (2022 campaign).

| ⌊a1106b74 0298 4a2a b9fd 4f8dd6826363 (FRG)⌉ |

Table 1: Positive intercepts (in bold) reported for completed RC holes.

_Note: Significant intercepts for pegmatite ≥1m and with sample interval(s) ≥0.5%
Li2O. Intercepts represent apparent widths and not true widths. Apparent width will
be greater than true width and the relationship between apparent and true width 
has not yet been established._ _* Intercepts include 1m of mixed mafic schist and
pegmatite along top and/or bottom contacts._

| ⌊c051c6b3 8925 4c75 8ad3 ded2c3e7fc44 (FRG)⌉ |

Figure 2: Plan view of the two sections A-B and C-D shown in Figure 3 and Figure
4 respectively.

| ⌊d7543dcd 5c9e 43aa 85ca c3b2a2ce3966 (FRG)⌉ |

Figure 3: Section looking southwest showing significant intercepts in holes TVRC0009
and TVRC0020. Note: Section A – B in Figure 3 shows significant intercepts in hole
TVRC0009 and TVRC0020 in relation to the current geological interpretation. Intercepts
show apparent thickness, not true thickness.

| ⌊e55abc02 ba38 46b7 a66f a8297c48cea0 (FRG)⌉ |

Figure 4: Section looking southwest showing significant intercept in holes TVRC0005.
Note: Section C – D in Figure 4 shows significant intercept in hole TVRC0005 in 
relation to the current geological interpretation. Intercept shows apparent thickness,
not true thickness.

**Drilling, Logging, Sampling and QA/QC**

The drill holes are sited using a hand-held GPS (Global Positioning System device)
within the tenement areas. On completion of the drilling, the final coordinates,
and elevations of drillhole collars are also collected using a handheld GPS.

The RC drilling producing rock chips core has been utilised to sample the pegmatite
below ground surface. Drilling was done using an Atlas Copco T3W RC drill rig with
a 5.5 inch (140 mm) steel percussion hammer to drill from surface to sample through
to fresh rock to a maximum down hole depth of 200 m. Drill chips were collected 
at 1m intervals from the start to the end of each hole. A small split from each 
intervals was washed, and a library of drill chips collected down each hole at 1
m intervals, and were qualitatively logged (i.e. lithology, weathering, and mineralogy).
A sample of the drill chips were also laid out on a pallet on site and photographed.
All drill chips in the chip trays were photographed both in dry and wet states, 
with the photographs stored in the database.

All intervals containing pegmatite material are split using a riffle splitter at
the rig. Splits were collected for analysis and a duplicate split was collected 
every 50th sample. A split of the rejects has been retained as a reference sample.
All host rock (i.e. non-pegmatite) intervals were also split, and a reference sample
retained. All bulk samples were weighed prior to splitting to monitor recoveries,
and wet or damp samples were first air dried, weighed and then split at Firering’s
core yard in Tounvre.

The samples were crushed to -2mm and pulverised at the Intertek Preparation Laboratory,
Cote d’Ivoire to 85% passing -75 microns. Sample pulps are exported to Perth, via
Ghana, where pulps are fused with sodium peroxide and analysed by ICP-OES and ICP-
MS to report 19-elements. (Intertek code FP6/MS and FP6/OE). QA/QC comprising alternating
Certified Refence Materials (CRM) are inserted every 25th sample and blanks (silica
chips) inserted every 33rd sample into the samples stream as well as alternating
field duplicates (comprising a split from the RC sample rejects) and pulp duplicates
are inserted every 25th sample into the sample stream sent to the laboratory to 
monitor the sampling methodology and laboratory performance as part of QA/QC compliance.

These QA/QC results were assessed upon receipt of analyses, checked and, if acceptable,
imported into the Company’s exploration database. Follow-up with the laboratory 
is instigated in cases were any QA/QC sample fails the QA/QC parameters. No areas
of concern were identified in the results being reported.

**Geology**

The area is located in the western limit of the Bagoé Basin within a southwest to
north-south orientated arcuate belt of metavolcanic and metasedimentary rocks of
the Birimian Supergroup that are surrounded by Eburnean-aged granitoids, including
undeformed K-feldspar porphyritic monzogranites, which are temporally associated
with the pegmatites in the region. The pegmatites within Atex are hosted in mafic
schists, although some minor mica schist is also present, and comprise a series 
of steeply dipping north-northeast striking bodies. Less common are smaller east-
west orientated pegmatites.

Work to date by Firering Strategic Minerals has identified several pegmatite bodies
around Spodumene Hill that were the focus of the initial diamond core drilling campaign
completed in 2022. Several of these pegmatites have been identified to be potentially
lithium bearing, with the lithium hosted in spodumene and lepidolite.

Subsequent soil sampling and auger drilling completed in 2023 identified a number
of additional pegmatite targets, which can be found at fireringplc.com:

·    22 June 2023 – 64940aeb5e64e_Exploration_Update_Atex_Lithium-Tantalum_Project.
pdf;

·    11 July 2023 – 64ad0989af4e2_Phase_II_of_Auger_Drilling_Campaign_commenced_successfully.
pdf; and

·    25 October 2023 – 6538d2be755b3_Commencement_of_Part_2_of_Phase_II_5000m_auger_drilling_campaign_at_Atex.
pdf.

This RC drilling programme focused on testing the strike extensions to the north
and south of Spodumene Hill as well as a number of the pegmatites to the south of
Spodumene Hill that were identified in the more recent soil sampling and Phase II
auger drilling completed in 2023.

Share on:
