# Erosion can cut the service life of oil and gas frac sleeves

- Link: https://www.directorstalkinterviews.com/erosion-can-cut-the-service-life-of-oil-and-gas-frac-sleeves/4121265611
- Published: 2026-10-08T12:12:00+01:00
- Author: Amilia Stone

Erosion can damage the critical internal surfaces of oil and gas frac sleeves, reducing
their ability to seal, isolate stages and operate reliably during hydraulic fracturing.

Frac sleeves are exposed to high-velocity flows containing abrasive materials such
as sand and proppant. Over time, this can wear away surfaces including ball seats,
ports and internal bores. Even relatively small changes to these areas can affect
the sleeve’s performance.

Ball seat erosion is particularly significant because the seat needs to maintain
its intended geometry to form an effective seal. As erosion changes the shape and
dimensions of the seat, the ball may no longer seal correctly. This can result in
pressure leakage and make it harder to isolate the required stage during fracturing.

Erosion can also affect the sleeve’s ability to open and close as intended. Increased
wear, combined with debris and scale, can alter the internal surfaces and increase
the pressure required to operate the component.

The problem can extend across an entire completion string. Operators can use dozens
of sliding sleeves in a single well, meaning erosion across multiple components 
can have a wider effect on completion performance. Sleeves exposed to high flow 
rates and abrasive fluids can experience particularly significant wear.

Hardide says its coating technology is designed to address this problem by protecting
the surfaces most exposed to erosion. Its tungsten carbide and tungsten metal matrix
coatings can be applied to areas such as ball seats, ports and internal bores.

The coatings are designed to resist erosion while maintaining the dimensions of 
critical components. According to Hardide, this can help frac sleeves retain their
sealing and operating characteristics for longer periods.

_**Hardide plc** (LON:HDD) is a pioneer in advanced tungsten/tungsten carbide CVD
coatings. They showcase unmatched capabilities to greatly extend the life of complex
geometry components facing extreme wear, erosion and corrosion._

Share on:
