# DG Innovate clear roadmap to commercialisation

- Link: https://www.directorstalkinterviews.com/dg-innovate-clear-roadmap-to-commercialisation/4121085855
- Published: 2022-10-11T10:37:01+01:00
- Author: Amilia Stone

**DG Innovate plc** ([LON:DGI](https://www.directorstalkinterviews.com/company/dg-innovate-plc/dgi.l)),
the advanced research and development company pioneering sustainable and environmentally
considerate improvements to electric mobility and energy storage, has provided an
update on the Company’s development and commercialisation strategy for its suite
of technologies.

**Highlights**

_Enhanced Drive Technology (EDT)_

·    Further significant progress made with the development of the Company’s Pareta
® electric drive platform in conjunction with its partners, the UK Ministry of Defence
and Meritor

·    Successful development of the advanced prototype Pareta® concluded and as planned
the focus is now on testing to develop a final design prototype

·    Clear staged roadmap set out for the Company to enter Pareta® pilot production
in 2024 and full scale commercial sales targeted for Q1 2025

·    Ongoing commercial discussions with collaboration partners and other potential
end users in a variety of markets, with plans to roll out the Pareta® product suite
more widely

·    Significant revenue opportunity within aftermarket integration services identified,
with a targeted acquisition strategy being adopted both to accelerate growth and
complement the existing product offering

_Enhanced Battery Technology (EBT)_

·  DG Innovate’s hard carbon anode materials have demonstrated commercially attractive
performance characteristics, in line with the best performing sodium-ion batteries
currently available

·  DG Innovate is working with a number of battery manufacturers to enable further
cell manufacturing development to be carried out in collaboration with them

·    The Company is planning to increase the scale of its in-house material production
capability

·    The Company has recently won an Innovate UK grant of £170,000 to carry out 
a feasibility study for the evaluation of manufacturing its sodium-ion anode material
at scale in the UK

·    The Company intends to primarily pursue a licensing model to bring its battery
technology to the market

**Enhanced Drive Technology**

The Company’s electric drive technology platform, Pareta® consists of a motor, high
power inverter and control electronics, with a novel ‘multi motor/inverter’ architecture
and a number of fundamental and patent pending innovations.  This technology has
been developed over a number of years via the Company’s ongoing work to build ultra
high performance and durable electric drives for the UK Ministry of Defence, with
the resulting product family currently in its third iteration.

The Pareta® platform has most recently been extended to deliver its associated performance
and durability parameters at a competitive cost point for volume manufacture for
commercial electric vehicles, initially for the Company’s collaboration partner 
Meritor, the US-headquartered global commercial vehicle components company.  The
advanced prototypes produced in a scalable 250kW/400kW format, aimed at bus and 
HGV applications, have already shown good performance versus electric motor systems
from global motor manufacturers.

To develop this new offering from its current advanced prototype phase to final 
product release and volume manufacture, the Company plans to take a staged approach.
Having successfully produced an advanced prototype design, work is now ongoing to
progress to a final design prototype.

As previously announced, testing of the 250kW Pareta® prototype drive is ongoing.
Performance results to date are encouraging, and in line with concept expectations.
The current cycle testing programme is expected to continue to the end of Q4 2022.
Further cycle testing, including in the 400kW configuration, is then expected to
be undertaken to establish and validate endurance requirements.

Following the successful completion of the final design prototype stage the Company
intends to undertake a phase of pilot manufacturing and industrial engineering. 
Whilst the current version is already well developed, further prototypes will enable
the design to be optimised, particularly regarding performance and costings, in 
order to progress to the pre-production stage.

As announced on 9 September 2022, the Company has been awarded funding from the 
UK Government’s Advanced Propulsion Centre (“APC”) through their Scale-up Readiness
Validation competition, part of the Automotive Transformation fund.  The APC funding
of approximately £600,000 will cover circa 50% of the eligible costs of the Company’s‘
Scale up Readiness Validation of Parallel Motor for Automotive Applications’ (“SUPAR”)
project.  The SUPAR project, which will involve the establishment of a pilot production
facility, is designed to optimise Pareta® to enable the most appropriate cost of
production using lean manufacturing techniques, enabling substantial upscaling to
commercial scale production and demonstrating the attractiveness of Pareta® drives
to commercial partners.

The pilot manufacturing will be carried out in parallel with continued Pareta® development.
The pilot facility, when fully developed, is expected to have a capacity of approximately
2,500 Pareta® units per annum and be revenue generating for the Company.  The planning
phase for the pilot facility is underway and the Company expects to start ordering
longer lead time items and site preparations later in Q4 2022 and into Q1 2023. 
The target is for the facility to be completed early in 2024.

Once the pilot plant has been established, the Company intends to carry out a period
of industrial engineering on the pilot production line during 2024.  Following industrial
engineering and with the achievement of a final commercial scale ready Pareta® design,
the Company is currently targeting full scale commercial sales by Q1 2025.  As noted,
the latest Pareta® drives have been designed from the outset to be compatible with
volume manufacture.

The Company is exploring multiple potential routes to market and continues to progress
commercial discussions with its existing collaboration partners and other potential
launch customers.  The Company is encouraged by the progress of discussions to date
and is confident that this will translate into commercial supply agreements in due
course.

The Company believes that Pareta® can address requirements within multiple electric
vehicle segments and potentially additional stationary applications.  Pareta® has
been designed to be scalable to a range of vehicle sizes, from e-bike size to large
marine drives.  To date the Company’s focus has been on the military, heavy goods
vehicle and bus segments and these are expected to remain a priority given the Pareta
® units inherent suitability for these applications and the shorter expected timescales
for these sectors to adopt new technology.

Following completion of the pilot scale production programme and in order to accelerate
the Company’s ability to secure commercial scale sales, the current intention is
for the Company to commence development of a volume manufacturing facility with 
a capacity to produce approximately 10,000 Pareta® units per annum.  Commissioning
of such a facility is targeted for 2025, at a capital cost currently estimated to
be approximately £5 million, with the potential for this to be funded through loans,
further grant funding and/or investment from a commercial partner.  Additionally,
the Company sees the potential for commercial agreements in the form of licenced
manufacture, joint ventures or further direct supply agreements in order to increase
the volume of units produced and sold.

In addition to demand from OEMs, the Company views the aftermarket as a substantial
opportunity for sales.  With an increasing number of emissions regulations being
introduced and the long useful life of heavy vehicles and buses, the Company expects
there to be an increasing demand for aftermarket electric vehicle conversions.  
The Company would expect to service this demand from in-house manufactured units,
with the Company also providing integration expertise and services.

In order to develop a full-service capability within the electric vehicle drive 
market, particularly to enable aftermarket integration, the Company is considering
appropriate acquisitions and intends to take advantage of any compelling opportunities
presented.  The Company intends to fund these acquisitions through a combination
of equity and debt depending on the nature of the acquisition.

**Enhanced Battery Technology**

The Company’s proprietary energy storage technology encompasses a family of hard
carbon anode materials produced from a sustainable bio waste product, specifically
developed for use in sodium-ion batteries, with potential applications in existing
lithium-ion battery production.  Sodium-ion batteries offer an attractive alternative
to lithium-ion batteries, using materials that are more abundant, with lower carbon
footprints, and which circumvent natural resource constraints involved in the production
of lithium-ion batteries.

DG Innovate believes that its battery partners consider the Company’s technology
to be a disruptive alternative in their aspiration to reduce dependency on hydrocarbon-
derived anodes for both sodium and lithium-ion battery technologies.  The Company’s
hard carbon anode materials have already demonstrated commercially attractive performance
characteristics, particularly enabling significant energy densities, in line with
the best performing sodium-ion batteries currently available, in battery cells manufactured
at a small scale in the Company’s own facility.

Further scale up of material production will involve an iteration of process engineering
to maintain the desired performance and material characteristics in high volume.
Additionally, integrating the material into commercial scale battery cell production
will require a parallel process of optimising cell design and large scale production
engineering.

The Company intends to primarily pursue a licensing model to bring its battery technology
to the market, through licensing to sodium-ion battery manufacturers, with the potential
for in-house material production should that prove commercially attractive.  Whilst
there is currently limited volume sodium-ion battery manufacture worldwide, a number
of large global battery manufacturers have recently announced plans to establish
substantial sodium-ion battery manufacturing capabilities.  As global sodium-ion
battery production increases in the coming years, the Company believes there will
be a substantial addressable market for its technology.

DG Innovate is already working with a number of battery manufacturers and arrangements
are being made to supply them with small sample batches of material for further 
testing and to enable further cell manufacturing development to be carried out in
collaboration with them.  In parallel, the Company is planning to increase the scale
of its in-house material production capability.

The Company has recently won an Innovate UK grant of £170,000 to carry out a feasibility
study for the evaluation of manufacturing its sodium-ion anode material at scale
in the UK, in particular to enable the Company to refine its economic and technology
model out to 10,000 tonnes-per-annum production of the Company’s hard anode material.

Due to the stage of development of the sodium-ion battery industry and the complexities
of cell manufacturing scale-up, the Company currently expects that moving from the
current pilot manufacturing phase to ‘giga-scale’ manufacturing will take around
42 months from now, although there is the potential for earlier deployment both 
in existing lithium-ion battery manufacture, and sodium-ion battery manufacturing
should commercial scale be developed sooner.

> **Commenting, Peter Tierney, Chief Executive Officer of DG Innovate, said:** “
> _Since I joined DG Innovate at the beginning of July, we have been reviewing the
> Company’s strategy in order to ensure that our world class technology is appropriately
> exploited and brought to commercial scale production as quickly as possible.  
> As set out today, we have a clear roadmap to commercialisation for both our electric
> mobility and energy storage technologies to take advantage of the numerous market
> opportunities we are seeing. _
> _“This is a very exciting stage of development for the Company as we progress 
> the significant potential of our proven suite of new and disruptive technologies.
> I believe that with this clear strategy and route to market for its technology,
> DG Innovate has a very bright future.  I look forward to providing further updates
> as we progress.”_

**Investor Webinar**

DG Innovate’s management will be hosting an online presentation and Q&A session 
at 5.30 p.m. BST on Tuesday 18 October 2022.  This session is open to all existing
and prospective shareholders.  Those who wish to attend should register via the 
following link where they will be provided with access details:

[https://us02web.zoom.us/webinar/register/WN_nPBNMLtIQqe7cXNWAUcV3w](https://us02web.zoom.us/webinar/register/WN_nPBNMLtIQqe7cXNWAUcV3w)

Participants will have the opportunity to submit questions during the session, but
questions are welcomed in advance and may be submitted to: [dginnovate@investor-focus.co.uk](https://www.directorstalkinterviews.com/dg-innovate-clear-roadmap-to-commercialisation/dginnovate@investor-focus.co.uk).

Share on:
